Manufacturing | Home

AS Dynamic Engineering . Manufacturing

AS Dynamic Engineering . is a complete air conditioning solution. We are uniquely equipped to manufacture and export all kinds of air conditioning ancillaries for the international market—from GI Mattel Ducting ,flexible ducting, motorized dampers, diffusers and take offs to grilles, filters, ventilators and inline fans.

Ducting Manufacturing

AS Dynamic Engineering we providing of All Type Ducting Rectangular ductwork has been the main type of ductwork in the history of HVAC. It is still used today on a greater percentage of commercial projects over any other type. State-of-the-art equipment like an Engle coil line, whisper lock, cornermatic and plasma cutting tables means efficient fabrication, lower costs to the contractor and shorter lead times. All of our rectangular ductwork is fabricated in conformance of the latest edition of SMACNA requirements including tie-rod and/or angle iron reinforcements.

Rectangular ductwork is available in galvanized, black iron, stainless steel, aluminum, PCD, gal annealed and/or dual wall in gauges 26 through 16 gauges. Customized heavier gauges may also be ordered.

SET Duct Manufacturing offers round spiral sizes of 4″ diameter through 68″ diameter which has you covered from the smallest to most of the larger projects. Exposed spiral ductwork has seen growth over the past 10 to 20 years because of its pleasing looks, airflow efficiency, field labor savings and lightweight construction as compared to rectangular.

Air Washer

AS Dynamic Engineering. is best leading company Air Washer, an air cooling equipment is manufactured by us in both single and double skin construction with compact, low height with multi centrifugal fan design. Double skin units are available with aluminum profile. The new, innovative designs guarantee predictable performance, long life expectancy and near zero maintenance.

Capacity Range:- 1000 – 250000 CFM Features of these products:

  • Double Skin Air Washer are fabricated out of Extruded Aluminum hollow Profile with 25/43 mm thick Double Skin Panels wit CFC and HFC for PUF and density of 40Kg/cum
  • Centrifugal fans used by are of DIDW Forward/Backward curved Or Aerofoil AMCA Certified generally of NICOTRA or KRUGER makes. All fans are statically and dynamically balanced
  • Common base frame for Motor and Blower
  • Single and Double Skinned Construction
  • Galvanized Steel frames of superior quality is used for construction of these units, with minimum thickness range of 1.2 millimeter
  • Multi slope S.S-304, Aluminum or G.I. drain pan ensures proper drainage of condensate
  • Induction motor with TEFC Squirrel cage for 50/60 cycle, 415 10% volts with AC supply in 3 phase or 1 phase
  • Motor make: SIEMENS/ ABB / KIRLOSKAR or any other western origin motor
  • Microbe filter along with primary filters are offered along with these products
  • Cellulose pad/ Spray type (single bank/ double bank) humidification systems are manufactured by us
  • Evaporative cooling pads make: HUTEK (THAILAND) or Munters (USA) and also can be provided as per specification of a client
  • Spray type humidification systems are fabricated out of G.I/ M.S. Header and Brass/PVC Nozzle
  • Perforated sheet is also provided in spray type humidification systems to ensure proper distribution of air thought out the humidification chamber
  • We use 4 bend PVC /G.I Eliminators to ensure that no water is carried away to Blower section and further to duct system

Air Handling Unit [AHU]

AS Dynamic Engineering . is best leading company An air handler is usually a large metal box containing a blower, heating or cooling elements, filter racks or chambers, sound attenuators, and dampers. Air handlers usually connect to a ductwork ventilation system that distributes the conditioned air through the building and returns it to the AHU. Sometimes AHUs discharge (supply) and admit (return) air directly to and from the space served without ductwork.

Range: 1000 CFM to 40000 CFM

  • Double skin casing with choices of GSS / SS304 for inner skin & Pre-painted / Powder coated for outer skin.
  • Choice of thermal break profile.
  • Choice of Al, SS & Screw less Al profile is also available
  • Choice of heat recovery wheel/ plate type heat exchanger / heat pipe is also available
  • Wide mix of components like Pre /Fine / Hepa/ Carbon filters, heating coils, wet deck pad, drift eliminators, electric heaters, sound attenuation section with sound attenuators, dehumidifiers, humidifiers
  • Choice of EFF 1 motors, VFD enabled motors, Flame proof motors, EC motors are also available.
  • Wide Choice of blowers – centrifugal forward curved, Backward curved or backward with aerofoil design is available
  • Fan wall technology is also available
  • UV light, cold plasma units is available as optional
  • Compact units up to 8000 CFM in both ceiling suspended and floor mounted vertical units are available
  • Choice of integrated control panel is also available,
  • Unit Construction & design in compliance with EN 1886
  • Also available with anti microbial, anti fugal coating and high resistant coating.

Fan Coil Unit

We are amidst the leading manufacturers and exporters of premium quality Fan Coil Unit. Each and every consignment is fabricated under the supervision of our professionals using cutting edge technology. Our collection is very easy to install and operate. Our collection is widely appreciated for their light weight, trouble-free operation and energy efficiency. Our range is offered to our clients at the industry leading prices.

  • Range 1 Ton to 3 Ton
  • Ultra Silent ceiling suspended in concealed design
  • Optionally factory fitted accessories
  • Also available in complete SS construction
  • Also available with remote control

Damper Diffusers and Grills

Our organization is engaged in manufacturing Steel Dampers that are manufactured using high grade mild steel or galvanized iron and are extensively used for grilles, diffuser and duct mounting. Being durable in nature, these are highly compatible for controlling air volume in all air handling applications. Further, these are coated with heat resistance paint to ensure that the dampers have long service life. These are also available with meters air volume, which can be locked at desired settings.


  • Manufactured in High Quality Mild Steel or Galvanized Iron
  • Designed to control air volume in all air Handling application
  • Meters air volume precisely from fully open or fully closed can be locked at desired setting
  • Suitable for grilles, Diffuser and Duct Mounting
  • Opposite blade and Parallel blade Configuration available
  • Standard Finish: Heat Resistance paint
  • Grill and diffusers are made from Aluminum Square and rectangular shape of diffusers are available
  • Volume control dampers are also available

Inline Fans

  • Cabinet is manufactured in galvanized steel.
  • Incorporated with a direct driven, DIDW / SISW forward curved centrifugal fan.
  • Flanged inlet and outlet for easy ductwork connection
  • Belt driven DIDW forward curved centrifugal fan is also available
  • Decorative inline fans with grills and filter is also available

Optional Features:

  • Internal Insulation, filters, Different discharge orientation
  • Complete SS body and Motor outside air stream is also available for HVAC and Kitchen and non corrosive environments.

Variable Air Volume Boxes


  • Honeywell make pressure independent boxes
  • These VAV boxes are as per AHRI standard
  • Factory calibrated for a particular range of air flow

Cooling Tower

  • Our Forced Draft Cooling Towers
  • Our Forced Draft Cooling Tower components are manufactured with a complete range of up to 700 Tons in a single Cell. For higher capacity cooling towers.
  • Our Forced Draft Cooling Towers have following distinct advantages: Saving in Water Consumption Saving in Space Consumption Saving in Power Consumption Gravity Flow Unpressurised Distribution System Twin Fans & Twin Motors Operation


Address: RZ 3271/37, Tuglakabad Ext. Kalkaji, Opposite Hamdard University New Delhi – 110019


Tel: +91-9818228486