7 Most Necessary Guidelines for Split AC Installation

In this article, you will learn about the 5 most necessary guidelines for split AC installation. The installation of split AC conditioners is really a crucial job.

If the installation is done accurately then your air conditioner will give efficient cooling. While if it not then it will not be giving the desired cooling effect.

Here Below Necessary Guidelines for Split AC Installation.

1. Measuring Your Home for AC Before Installation

When you want to install your AC for your room then you will send a technician to measure your home. With a proper home measurement, what size of AC you required and also avoid purchasing a unit that is too large or small.

Air conditioning industry professionals required proper tools called Manual J which calculates your room and ensures that you buy the perfect air conditioning service.

There would be proper spacing between the wall and the AC unit.

2. Proper Spacing Between the Wall and AC Unit

slide-3-home

An indoor unit of split AC requires at least 20cm of open space of its surrounding of both top and bottom sides for the proper air flow on all sides.

 3. Appropriate Installation Height From Bottom to Ground

Always mount the indoor unit of split AC at a height of at least 7-8 feet above the ground. It should be adequate for proper cooling inside the room.

4. There Would be a Correct Tilt Angle of the Indoor Unit

While fixing the aluminum bracket on the wall. You would make sure that bracket is given under a slight tilt angle.

Therefore, when an indoor unit of split AC is fitting at a slight angle. It also enables the unrestricted flow of condensed water from the drain pipe.

5. Correct Location of an Outdoor Unit

service

For the proper cooling, mount the indoor and outdoor units of split AC away from direct sunlight.  Always install an outdoor unit of split AC in an open space. By this, there is no hindrance to the heat which is dissipated from the condenser.

6. There Would be Proper Placement of Outdoor Unit

The outdoor unit of split AC must be placed on a harsh surface.  This unit contains several components like fan motor, a condenser or a split AC compressor.

If the unit is not a flat surface then it will vibrate excessively.

This could also lead to be breakage of compressor or condenser unit, copper pipes or coolant leakage etc. Further, the vibrating unit also makes a noise.

7. Proper Distance Between the Indoor and Outdoor Unit

There would be a correct distance between the indoor and outdoor unit which plays a great role in cooling.

The coolant at low temperature flows inside the copper tubes between the both inside and outside unit of AC.

There is greatly lost of cooling effect to the atmosphere and the refrigerant flow liquid between the units.  To overcome this loss,  keep the distance minimum between indoor and outdoor unit.

The maximum allows the distance between the indoor and outdoor unit is about 15 meters.

Well, this was the end of the article of 7 most necessary guidelines for split AC installation. For this, dynamic AC provides a complete detailed of the system.

They also check that each part of the system is work efficiently.

AC Repair in Patel Nagar

Contact Us

%d bloggers like this: